top of page

Tracks & Trails

Public·7 members

P Amp;e Micro Flash Programmer Download


What is P&E Micro Flash Programmer?




P&E Micro Flash Programmer is a software tool that allows you to program, reprogram, and debug external flash devices in-circuit, via one of P&E Micro's compatible hardware debug probes. The debug probe connects the USB port of your PC to the target header. The programming software can then talk to the target processor via debug mode.


P&E Micro Flash Programmer supports a wide range of MCU architectures and devices, such as ARM, ColdFire, PowerPC, DSC, Kinetis, LPC, S12Z, STM32, and more. It also includes a library of flash algorithms for different flash types and sizes. You can use P&E Micro Flash Programmer for interactive or scripted programming, as well as serial numbering.




p amp;e micro flash programmer download


DOWNLOAD: https://www.google.com/url?q=https%3A%2F%2Ft.co%2FqoB86Kxqg4&sa=D&sntz=1&usg=AOvVaw1TgAYXArqPAaYz9HeV7dVR



Why do you need P&E Micro Flash Programmer?




P&E Micro Flash Programmer is a powerful and versatile tool that can help you with your flash programming and development needs. Here are some of the benefits of using P&E Micro Flash Programmer:


  • It is easy to set up and use. You just need to download the software from the official website, install it on your PC, connect your debug probe to your target device, and launch the software.



  • It is compatible with various hardware interfaces. You can use P&E Micro Flash Programmer with any of P&E Micro's Multilink debug probes or Cyclone programmers. These hardware interfaces are reliable, fast, and cost-effective.



  • It supports multiple programming functions. You can use P&E Micro Flash Programmer to program, verify, blank check, upload, display, erase, protect, unprotect, modify, compare, fill, split, join, swap bytes/words/dwords/qwords/endianess/ASCII/HEX/BIN/S19/MOT/ELF/COFF/IEEE695/OMF51/OMF251/OMF166/OMF169/OMF186/OMF286/OMF386/OMF486/OMF586/OMF686/intelhex/intelhex32/intelhex386/intelhex486/intelhex586/intelhex686/motorola/motorola32/motorola386/motorola486/motorola586/motorola686/srec/srec32/srec386/srec486/srec586/srec686/binary/binary32/binary386/binary486/binary586/binary686/crc16/crc32/crc64/md5/sha1/sha256/sha512/hmac and more flash data with the software interface or the command-line executable.



  • It allows you to create and run programming scripts. You can use P&E Micro Flash Programmer to create and edit programming scripts with CPROG, a command-line executable that supports various commands and parameters. You can then run the scripts from the software interface or from a batch file.



  • It enables you to assign serial numbers to flash devices. You can use P&E Micro Flash Programmer to generate and program serial numbers to flash devices with the Serialize Utility. You can customize the serial number format, length, increment, and location.



How to download and install P&E Micro Flash Programmer?




To download and install P&E Micro Flash Programmer, you need to follow these steps:


  • Go to the official website of P&E Micro at .



  • Click on the Products tab and select Flash Programming Software from the drop-down menu.



  • Choose the version of P&E Micro Flash Programmer that matches your target MCU architecture and device. For example, if you are using a Kinetis device, you can choose PROGACMP for ARM devices.



  • Click on the Download button and save the installer file on your PC.



  • Run the installer file and follow the instructions to complete the installation process.



  • Launch P&E Micro Flash Programmer from your desktop or start menu.



Choosing the right version of P&E Micro Flash Programmer




P&E Micro Flash Programmer comes in different versions for different MCU architectures and devices. You need to choose the right version of P&E Micro Flash Programmer that matches your target device. Here are some of the available versions of P&E Micro Flash Programmer:


VersionDescription


PROGACMPFlash programming software for ARM Cortex devices


PROGCFZFlash programming software for ColdFire V2/V3/V4 devices


PROGPPCNEXUSFlash programming software for PowerPC Nexus devices


PROGDSCFlash programming software for DSC devices


PROGKINETISFlash programming software for Kinetis devices


PROGLPCFlash programming software for LPC devices


PROGS12ZFlash programming software for S12Z devices


PROGSTM32Flash programming software for STM32 devices


And more...You can find more versions of P&E Micro Flash Programmer on the official website.


Activating the license of P&E Micro Flash Programmer




To activate the license of P&E Micro Flash Programmer, you need to have a compatible hardware interface, such as a Multilink debug probe or a Cyclone programmer. The license is stored on the hardware interface and is automatically detected by the software. Here are the steps to activate the license of P&E Micro Flash Programmer:


  • Connect your hardware interface to your PC via USB cable.



  • Connect your hardware interface to your target device via ribbon cable.



  • Launch P&E Micro Flash Programmer from your desktop or start menu.



  • Select your hardware interface from the Connection Manager window.



  • Select your target device from the Device Manager window.



  • The software will check if your hardware interface has a valid license for your target device. If yes, you can start using the software. If no, you will see a message that says "License Required".



  • If you see the "License Required" message, you need to purchase a license from P&E Micro's website. You will receive an activation code via email after your purchase.



  • To activate your license, click on the "Activate License" button on the Connection Manager window.



  • Enter your activation code and click on "OK". The software will write the license to your hardware interface.



  • You can now use P&E Micro Flash Programmer with your target device.



About

Welcome to the group! You can connect with other members, ge...
bottom of page